Knowledgebase
Geneeworld Support Desk > Geneeworld Support Desk > Knowledgebase

Search help:


How does Sync2 connect to my network?

Solution

 

    Standard Client Mode (hardwired to the network)
  • Plug the Sync2into your network using the onboard LAN port.
  • Your network will assign the Sync2 an IP address.
  • You can also assign a static IP address to the unit from the admin panel.
  • Users simply connect to your internal network as usual and launch the software.

    AP Client Mode (wireless to the network)
  • Open a browser, navigate to the IP address of the unit, and access the admin panel.
  • Select WiFi setup from the list on the left, enable Wireless LAN, and select Station as the mode.
  • Press the scan button.
  • Select your SSID from the list, select the appropriate encryption and enter the password.
  • The Sync2 unit will reboot, then display an IP address from your network.
  • Users simply connect to your internal network as usual and launch the software.

    HotSpot Mode (standalone - no connection to the network)
  • Open a browser, navigate to the IP address of the unit, and access the admin panel.
  • Select WiFi setup from the list on the left, enable Wireless LAN, and select Access Point.
  • Name the SSID, enable and select the appropriate encryption and create a password.
  • The Sync2 unit will reboot and display the default IP address (192.168.100.10).
  • Users simply connect directly to this WiFi signal and launch the software.
 
Was this article helpful? yes / no
Related articles Can’t Access Cloud App
Can I install and run ClassComm from a Server across a network?
Registrar loading up to Windows login page
How do I connect it to my display?
Google Chrome not allowing touch function.
Article details
Article ID: 101
Category: Genee Sync 2
Date added: 3-May-2016 4:34pm
Views: 206
Rating (Votes): Article rated 4.0/5.0 (4)

 
« Go back

 
Powered by Help Desk Software HESK, brought to you by SysAid