Our 4th generation Sonic Shock 4 is our most popular anti-theft alarm, now used for 10 years world wide. Its small 5 x 10 cm footprint makes it ideal for flat screen televisions, LCD projectors, and computers. It works just like a car alarm - for each one of those a thief takes, he has to take our sounding alarm with them. Everyone hears him. Worse, he can’t hear anything else - someone coming for instance. It’s a lethal combination, one that’s completely eliminated theft of our customers’ high value equipment.

The SonicShock alarm is a highly cost effective, visible and auditable deterrent to would be thieves!

• User manual only 12 words:
  • 1. To turn on, turn key right
  • 2. To turn off, turn key left
• 10 Minute max installation time
• Optional wall anchor
• 13mm high strength grade stainless steel;You’ll break lots of titanium bits trying to drill it
• 117 dB piezo siren (120dB with Sonic Shock Plasma version)
• 3500 psi impact resistant glue. That’s 50% stronger than bonding agents used on other ‘security’ products
• Removable core lock, which means that if you have to you can re key a lock in about 10 seconds
• All your alarms keyed the same(if that’s what you’d like)You can have anything you’d like - we custom key all orders
• No ‘low battery beeps’ 9 volt alkaline battery lasts 50 years monitoring or 2 hours full alarm
• No false alarms There just aren’t

Applications	Our most popular model, Sonic Shock 4 is an effective anti theft solution for any equipment - projectors, televisions, and computers - which have a 2 x 3.8 inch (5 x 10 cm) flat surface area for mounting
Dimensions	2 x 3.8 inches x 1.3 inches high (5 x 10 cm x 0.33 cm high) The Sonic Shock 4 is sufficiently thin to be affixed to the back of wall mounted flat panel televisions
Kit Contents	Alarm module, Mounting plate, Electronic tether, Ilco removable core lock, 9 volt industrial alkaline battery Installation & User Guide Kit does not include glue or keys; these items are ordered separately. Economise buy ordering 1 glue cartridge for every six Sonic Shock 4 alarms, and only a handful of keys
Construction	Alarm housing: 0.05 inch / 1.3 mm thick 18 gauge hard grade brushed stainless steel
Mounting plate	0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel
Acoustic Generator	Mounting plate: 0.07 inch /1.9 mm thick 14 gauge hard grade stainless steel
Locks	Ilco 5 wafer cam lock Removable core Available keyed alike or keyed differently (200 combinations)
Power	9 volt industrial alkaline battery 50 milliamp hour capacity 1 microamp monitoring current 400 milliamp current at full alarm
Battery Life	5+ years in monitoring mode (50 years theoretically possible) 2 hours in full alarm
Control Circuit	Proprietary Comprotec single purpose analogue computer
Adhesive	Methylmethacrylate kit ("Plastic Welder") 2 part exothermic cure non toxic structural adhesive 3,500 psi strength on al metals and most plastics (except polypropylene) Very high impact resistance (eg. hammer blows) 4 minute working time; 80% strength in 2 hours; 100% in 24 hours Impervious to water or solvents when cured
Surface Bonding Area	40 square centimetres / 6.75 square inches
Weight	500 grams
Operating Temperature	0 - 45 degrees Centigrade Alarm is intended for indoor use
Environmental	All Sonic Shock electronics are European Union RoHS compliant (lead free electronics) All packaging, master packaging, and paper inserts are fabricated from 100% recycled materials
Support	Instructions included with every kit
Warranty	Product, excluding the battery, is warranted for life, and for all causes (including damage inflicted by customer or a theft attempt). Warranty is limited to repair or replacement of the alarm FOB our factory or authorized distributor

Sonic Shock 4 Guide